AC Blast: Causes and Safety Measures!

AC Blast: Causes and Safety Measures!

The use of AC (air conditioners) increases rapidly during the summer season, which also increases the importance of proper maintenance and safety. However, if the AC is not maintained properly, it can cause some dangerous incidents, such as AC blast or fire. In this article, we will discuss in detail the causes of AC fire or blast and the measures to prevent them.

Main causes of AC fire

• Bad wiring or short circuit: If the wiring of the AC is old or damaged, it can cause a short circuit, which can cause a fire. It is very important to check its wiring and circuit before using the AC in summer.
• Low-quality extension board: Using a cheap and poor-quality extension board can cause overloading, which can cause a short circuit and fire. Always use a high-quality extension board.
• Not getting regular servicing done: Delaying the servicing of the AC can lead to the accumulation of dust and dirt, which can heat its electrical parts and increase the risk of fire.
• Overheating of the compressor: When the compressor of the AC works on excessive load, it can overheat, which increases the risk of fire. Also, the presence of any technical problem in the compressor can also increase this risk.
• Use of fake or cheap parts: If cheap and inferior parts are used during AC repair, then it can cause electrical faults, which can cause fire.

Ways to avoid fire in AC

• Get regular servicing done: Regular servicing of AC is the most effective way to take proper care of it. Get it serviced before the use of AC increases in summer and also in the middle of the season so that the dust and dirt accumulated in it can be removed. Apart from this, also check the wiring and other parts so that there is no risk of short circuit.
• Use high-quality products: The power sockets, wires and extension boards of the AC should always be of high quality to reduce the risk of overloading and short circuits. Using cheap and substandard appliances can be dangerous.
• Use a stabilizer: If there is voltage fluctuation in your area, use a stabilizer. The stabilizer provides proper voltage to the AC, which protects the electrical parts of the AC.
• Professional repair and maintenance: Do not try to fix any kind of fault in the AC yourself. Always get repair and maintenance done by a certified and experienced technician. This is necessary to increase the lifespan of the AC and ensure safety.
• Pay attention to correct installation: The AC should be installed correctly. During installation, ensure that there is proper space and ventilation for airflow.